NetAlly Link-Live

Learn how to import site surveys from NetAlly Link-Live with Hamina Network Planner Plus.

Hamina Network Planner Plus includes access to integration with NetAlly Link-Live for the purpose of importing site surveys.

A Hamina Network Planner Plus subscription is required to import site surveys from NetAlly Link-Live.

Surveys can be performed with NetAlly AirMapper with the following NetAlly handheld devices:

• AirCheck G2

• AirCheck G3

• EtherScope nXG

• CyberScope

• CyberScope Air

Once the surveys have been uploaded to Link-Live, they can be imported to Hamina Network Planner Plus.

Add Maps to Link-Live

1. Navigate to NetAlly Link-Live.

2. Select AirMapper, and then Create New Floor Plan.

   

3. Follow the wizard to name, crop, and scale the floor plan, and click Publish at the end.

4. You'll be taken to the Manage Floor plans view. Select the floor plan you just uploaded, check any devices that you'd like to send it to, and click Push to Units.

   

5. On the handheld device, open the Link-Live app.

6. Make sure Enable Link-Live is enabled.

   

Perform Surveys

1. On the handheld device, open the Link-Live app.

2. Make sure Enable Link-Live is enabled.

3. Open the AirMapper app.

4. In the menu, in AirMapper Settings, use the radio button to select the floor plan you just uploaded from Link-Live.

5. In the menu, select AirMapper.

6. Tap the Start button, and tap on the map to add a survey point. Note: The site survey works identically to a stop-and-go survey in Hamina Onsite.

7. When finished, tap the Pause button in the upper right, and then the Share button next to it. Select Upload to Link-Live.

   

8. Tap Save to AirMapper Files at the bottom of the screen.

   

9. Back in NetAlly Link-Live, click on AirMapper in the menu, and select AirMapper. The survey should appear.

Import to Hamina Network Planner Plus

1. Open the Project menu, and select Import.

   

2. In the grid of options, select NetAlly.

3. Enter your NetAlly Link-Live username and password (which Hamina Network Planner Plus will use to connect authenticate to Link-Live), and click the Continue button. Note: Multi-factor authentication in Link-Live is not supported by Hamina at this time. You might need to temporarily disable MFA. Sorry about that! 🫠

4. Select the relevant organization, and check any floor plans that you would like to import. Check the import surveys option to include surveys. Click Import.

   

5. Once the import has completed, click the Survey tab at the top of Hamina Network Planner Plus. You may wish to select a specific SSID to view, and increase the Guess Range.